2008 sienna LE Remote Start, Bulldog security RS82 and PKALL bypass mod.

[sienna20082008]

I found a problem with the wiring diagram,the key sense wire is NOT the blue with black stripe, It's the white with black. There are two of this color in the 4 pin plug. It's on the top, the one next to the blue w/black stripe. I used ebay so all the parts where cheap.RS82, PKALL Xpresskit, and a 775 relay. If you don’t mind using a key to enter the car when using the system this is the way to go.

Let me know if anyone has a question on how to, I've done a few of these Bulldog systems.

[12voltwizard]

I have a viper 2 way alarm, keyless entry, remote start and smart start I am going to put in my 2012 Sienna. Do you happen to have a wiring diagram for the 2012 Sienna as well as your opinion on the PKALL? Any help and advice would be greatly appreciated.

[sienna20082008]

The onlything I can find is 2011. I would suggest contacting Viper.
An interfacebypass module is worth having. Otherwise you have to use your spare key in a bypass module. Check out Xpresskit.com for the correct model you need. Then go to ebay

[Bpetty]

The wiring for the 2012 should be the same as the 2011. The PKALL is a good product, but The FLCAN by Flashlogic is a great product. You will have to have it flashed for your specific vehicle (i.e. a dealer will need to do it), but it will do a lot for you, cutting down your instal time and making the whole thing a lot cleaner under the dash.

[sienna20082008]

I agree with 2011 is the same as 2012. After installing the starter kit 5 morewires will not be a problem. The PKALL is half the price and you don’t need topay the dealer to program it. The wires under the dash just takes some ziptieing skills there is no way around it plus no one will see it.