Toyota Sienna Forum - banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 18 Results
  1. General Discussion (Gen 1)
    Have anybody try to replace front sway bar with something more stiff or maybe adjustable? Any recommendations? Which one will fit? Thanks! (Sorry for cross posting but I hope to get a little more visibility here)
  2. Mods and Projects (Gen 1)
    Have anybody try to replace front sway bar with something more stiff or maybe adjustable? Any recommendations? Which one will fit? Thanks!
  3. Problems, Maintenance, and Repair (Gen 2)
    While inspecting my front tires, I noticed that the passenger side stabilizer link bar needs to be replaced. The top plastic/rubber piece is ripped out. I see on YouTube that it appears to be easy to change. Has anyone replaced them on their own? I know the piece is about $30. I don't...
  4. Problems, Maintenance, and Repair (Gen 1)
    I am getting ready to replace the sway bar bushings on my 2000 Sienna. It looks like a simple job, seems like all you have to do is remove the clamp, put the new bushing in and then bolt the clamp back on. Is that all there is to it? Any tips? The sway bar links don't need to come off right? I...
  5. Mods and Projects (Gen 3)
    didn't see any mention of this. i believe they came out a few weeks ago. anyone get em yet?
  6. Problems, Maintenance, and Repair (Gen 2)
    After replacing both front struts and sway bar links the sway bar is now a lot lower In fact, the sway bar is almost resting on top of the lower control arm (on both sides). Is it possible that the top part of the strut assembly (the flange that attaches to the vehicle) is oriented the wrong...
  7. Problems, Maintenance, and Repair (Gen 1)
    I have a 98 Sienna and I've been replacing parts in the front suspension to stop a knocking noise. Last weekend I removed the stabilizer bar to replace the bushings (it was hard to see if they were bad). The two nuts on the drivers side were no problem. When I got to the passenger side one of...
  8. Towing & Hauling
    I have a 2007 sienna minivan (8 passenger). I have inherited a vw beetle and I really, really want it, but it's in California and I'm in Utah. The beetle runs, but I'm afraid not well enough to drive through the mountains. I have been googling. It seems that my van has the pre-towing package...
  9. General Discussion (Gen 3)
    Do anyone know where to attach a blackhorse front bull bar and rear protecror
  10. Towing & Hauling
    Been looking for a hitch to pull a pop up camper. Found a Drawtite class lll hitch (I think it's class lll) with the 2" opening, on Craigslist for $25.00, that is about 1 year old. Owner no longer has his 08 Sienna, and the hitch doesn't fit his 2011. I thought this was a good deal. Now my...
  11. General Discussion (Gen 3)
    I want upgrade 2011 sienna LE Shocks & Struts & front anti-sway bar Have any vender or brand can to use?
  12. General Discussion (Gen 1)
    It looks like I will be inheriting a 1998 Toyota Sienna XLE soon. I'm wanting to install a larger sway bar (rear), but am having trouble finding where it mounts. I've looked under the car, from the front and rear.. but am having difficulty finding it. I looked inside the U-joint that goes...
  13. General Discussion (Gen 2)
    I replaced my left lower control arm and came to find out that the sway bar is hitting the lower part of my strut. Its making a really loud noise when I drive like metal hitting metal, how do I fix this? do I need an alignment or just put a new sway bar kit? Thanks
  14. Problems & Issues
    Just bought a used 01 sienna le. Noticed after the last two rains a leak along the trim and just down from the grab handle. It is also wet a couple of inches in where there is a dip in the trim. I am trying to figure out if it is coming from the roof rail which squishes a bit when pressed and...
  15. Towing & Hauling
    I'm thinking of installing a Reese/Draw-Tite single bar, light duty wdh on my 2005 Sienna to tow a Fleetwood tent trailer. I'm concerned that the hitch shank the single bar kit comes with wont have the needed rise. Does anyone own such a wdh and know what the maximum rise you can set the shank...
  16. OEM & aftermarket products, mods & accessories
    Do you have these cool accessories add on your van? If yes please share...
  17. Towing & Hauling
    I am a electrician and use my sienna for work carrying ladders and pipes. I have outgrown my oem roof rack cross bars. I find myself constantly taking a long time to tie/secure the ladders to the roof rack. I have looked at aftermarket professional ladder racks and it appears drilling is...
1-18 of 18 Results