Search Results for ‘beam’

Anyone ever replaced the rear Axle Beam bushings on a 98 - 00 Sienna? I am considering doing it but would like to hear from someone who has done it if it's a job I could do in my Garage or if it should go into the shop. ??

Hi guys, just FYI. I Checked today, there is no turning signal relay under the steeling wheel. So I guess if you want to change the led turning light, have to go for the 2x 50w 3 ohm resistor option.i see some relay in the engine compartment. Different size, integrated relay, that's what it says...

Is it a good idea change the fog light to hid? I want more light when I need it. It come with manufacture fog light. i have few considerations. 1. Is it safe for incoming traffic? Since there is no "ball" in the fog light assembly. 2. Will HID produce more heat that damage the fog light...

Has anyone tried these LED bulbs on their low beam? How is it compared to HIDs? http://m.ebay.com/itm/131286308614?nav=SEARCH

Greetings! While traveling on vacation, our 2010 XLE threw an E3 code on our laser cruise control. After returning home, reviewing this website, and searching the internet, I cleaned and inspected the sensor unit in the bumper. There seems to be no damage to the lens, bumper, or surroundings...

Got these a couple of weeks ago and had them mounted in the high beams of my Sienna. However got lucky and was able to snag a OE HID headlights so have no need for these. These are genuine CREE 9005/HB3 bulbs, very very bright and were imported directly from Taiwan. These are a direct fit in...

Hi guys, We have a 2008 Sienna that was purchased brand new. We went on a road trip recently and done some night driving. We just found that the high beam light will not stay on whenever we let go of the Light Switch control. The high beam does come on when we pull the light switch control, but...

I've got a problem with my '06 XLE. One highbeam doesn't work. I swapped in a new bulb, no change. I tried the new bulb in the other highbeam socket, and it worked. I checked the fuses in the box on the driver's side of the engine compartment and none of the headlight fuses were blown. Is...

I need help trouble shooting my 2004 sienna. When I turn on the headlight both low and high beam come on. I had noticed that sometime in the morning it work normal like you can turn on and off the high beam, but then the high beam intermittently come on. When it does come on, I can't turn it...

Background story: My left headlight had some moisture/condensation inside so Toyota replaced it for me under warranty. In the back of my mind, I knew replacing one side would yield an uneven beam but unfortunately, I had no choice but to have it replaced. I could have asked them to adjust it...

Need help to find out why my low beam lights does not work, only the high beam lights work. I just disconnected my HID conversion kit and place my OEM light blubs back on.. but only the high beam works. Suggestion what to look for to solve this problem. thanks.

I have a 2005 Limited with the HID headlamps and the passenger side high beam doesn't work. The driver's side high beam does work. Both DRL bulbs work. I have replaced the bulb, same problem. Any ideas? Thanks

Trying to modify my Daytime Running Lights (DRL) on my new to me 2011 Sienna (US model) such that you are unable to turn them off (requirement for import to Canada). Thanks to previous posts on this subject I've removed the cowling from the steering column and located the connector for the DLR...

Posting some TSBs (Technical Service Bulletins) I happen to have collected during my years of Sienna ownership... This one is a REPAIR MANUAL SUPPLEMENT regarding how to properly re-align the laser for the LASER CRUISE CONTROL (LCC) system. TSBs are not necessarily official "recalls". They are...