Search Results for ‘curt’

I installed the Curt Hitch, 13105, on my new 2015 Sienna XE AWD. I have to say it was not too difficult, although the sun was hot so there was a little cussing at small things. I took some short cuts, which I can recommend (they worked out; that is not always the case). First, on the wiring...

Will this hitch fit my 2014 Sienna AWD XLE or not. I get confusing results. http://www.amazon.com/Curt-13105-Cla.../dp/B0053P69IO Thank You

Will this hitch fit my 2014 Sienna AWD XLE or not. I get confusing results. http://www.amazon.com/Curt-13105-Class-Receiver-Hitch/dp/B0053P69IO Thank You

I have a 2013 XLE and will occasionally pull a 2 wheel open utility trailer with a gross weight of less than 1000 lbs. Hidden Hitch has a new class II, 90217, that they say fits within 1/2 inch of the rear bumper fascia. I like the idea of a close fit and less visibility when not towing. The...

Hello, Just bought a new Curt hitch for my 2007. I live in a climate that salts and sands the roads. I didn't wan't my hitch all rusty looking after a year so I decided to spray some rubberized under coat material on the back side of hitch before install. Just thought I would share some pics...

Hi'm I'm selling my 5 month old Curt hitch which can work for 2004-present Siennas. I'm also including a hitch protector that lets your hitch "roll" when hitch hits ground... Only asking for 90 for everything... bought hitch and protector retail for around for 170..... local pickup in SF bay...

Hi I'm selling a rarely used 2" hitch made by curt. This hitch will fit not only the new Siena's but also the 2004 and up. Love the hitch but need the 1.25" hitch instead. Will post pics soon but here is link: http://www.etrailer.com/hitch-2011_Toyota_Sienna.htm Please call me at 6503924554...

Hi... I just purchased a 2012 XLE AWD model and wanted a hitch to carry my bike rack. I installed the Curt 2" hitch. As folks have noted previously, the AWD model cars have a special lip on the underbody trim panel and it is smashed when you install the Curt Hitch. I really don't like the way...

Can anyone here tell me the difference between the Curt 13105 and the 13256 hitches? I need a hitch for my 2012 XLE but want to make sure I'm getting the right one with the highest tonque weight capacity. Thanks...........

Why is is that wiring harness instructions are so lame? I may be a wiring newbie, but this is frustrating and avoidable if there was just some basic and helpful directions included for this product (although I do realize that all other posters on this topic had no problem installing). I...

I was planning to tow a 6x12 ft. Uhaul trailer, class 3, so I bought online a square tube, Rigid mfr. hitch receiver for our 2010, 3.8L Sienna. The webpages and the included 32nd generation photocopy instructions assured me it should install with no problems. The Rigid did not fit the seat...

I just installed the Curt 56106 in my 2011 Sienna Limited. In checking the power, I see that I have 12 volts on all the time at the green, brown and yellow wires as tested with a voltmeter. The van lights are not on. I even disconnected the wires from the lights and no change. Has anyone had...

Here are some photos of the Curt 13105 Class 3 Receiver installed on my 2012 LE AWD. The clearance is OK and I do not scrape as I pull in my drive way but I wish there was a little more clearance. Unfortunately there is nothing I can do about that. It took me and a helper less than an hour to...

I purchased the Curt 56106 T-Connector kit on Amazon for 48$ (free Shipping). The installation was fairly straight forward. The converter box of this kit is designed to be mounted on the drivers side of the van. The length of the wires serving the left and right tail-light dictate which side...

I was looking at the Curt website today as part of a non-Sienna discussion, and checked what they were currently offering for the Sienna. To my surprise, I found that in addition to their long-existing round-tube 1.25" receiver, they have a rectangular tube 1.25" receiver; that's right, not...

Purchased brand new and had it for less than a year. This is a Curt Manufacturing 13511 Class III Receiver that will fit all Toyota Sienna years 1998-2003. Still in immaculate condition; installed a bike rack on it and that was it. Reason for selling is that I sold the Sienna for a 4Runner...

So I went to a local trailer hitch shop today to have a hitch installed on my SE. The work order stated that they were installing a Curt 13256. After they were done they had installed a Draw-Tite CQ75149. Not what I wanted. I am still waiting to hear back from them, but what would you do? A few...

Hey guys anyone have a pic of the curt 13256 installed on their 2011? Also whats the clearance from the bottom of the receiver square? Im trying to decide if its this no name hitch the dealer installed on my wife's van thats the problem. Going to measure now.... Its low. Thanks!

I have a new 2011 Sienna LE, and so far I like it. The only hiccup has been that the hitch was not available right away. Well, no longer - I just received an email from Curt, and the model 13256 hitch is now available for the 2011. Great! I can install it myself, and maybe rope a friend in to...

Just made a deal over the phone (Craigslist) to purchase a used Curt 13256, plus wiring kit, for $90. The only thing about it is he said he's leaving the bolts on his van. Who knows why. Am I missing anything super critical by not getting the official install kit? I'd rather buy new bolts...