Search Results for ‘lower’

Hi everyone. I have 2015 Sienna Xle. Looking to install the chrome moulding on the bottom of the doors. Found the part online from the dealership but I'm wondering how hard is it to do. Does anyone have experience doing it. I'm in Illinois and if someone local can help, I can certainly pay for...

Over the weekend while driving around an 18" tall planter to park our 2010 Sienna in our driveway, I misjudged the angle of the usual turn we make (and have done 100s of times), and hit the planter. It caused this damage: My wife is going out this week to get estimates from body shops here...

Over the weekend while driving around an 18" tall planter to park our 2010 Sienna in our driveway, I misjudged the angle of the usual turn we make (and have done 100s of times), and hit the planter. It caused the damage in the attached picture. My wife is going out this week to get estimates...

I came out of church last night and my Sienna wouldn't move. I looked under the hood and started it and fluid was blowing out of the radiator where the tranny cooler hose connects to the radiator on the bottom. On further inspection it looked like it had been threaded out as the entire fitting...

Wanted to get side moldings for my 2015 Sienna and noticed there are "lower moldings" out there. In my opinion, side molding provides some protection while lower molding seems to be decoration only. Was that right? Anyone installed both? Thanks!

Replacing front strut and rear shocks and noticed the ball joint leaking. The wheel hub did get moved left to right while taking the strut out. Wondering if it got stretched too far one side causing it to leak. Do i need to replace the ball joint. 130k miles original. Thanks

Perfect shape, took them out of the van after a week and replaced with Weathertech Floor Liners. They are from the 8 passenger SE model, but may fit others. I am looking for $75 shipped.

Thank you in advance for your time and knowledge. All the lower rubber window trim has been brutally sun burned from the Florida sun and humidity. How does one remove these parts from vehicle safely without damaging it or other components please. Would like to clean and paint. Thanks again.

Has anyone come across a way to lower the minimum speed for cruise control? It would be nice if it would handle lower than 45kmh so that I could use it in heavy traffic to and from work. I know this is probably not possible since I can't find much on reprogramming the computer in the Toyota in...

Im planning to put the (silver) lower door molding on my 2015 Sienna SE, does it protect from dings from other cars door or it is just for the style?

I may have to replace the lower control arms on my 2004 Sienna FWD LE (just turned 149,000 miles), because the bushings are getting a little cracked-looking. Anybody know if it's possible to replace just the bushings themselves? Or must the entire control arms be replaced? What brand of bushing...

Had some time this AM to install my lower door molding they came out nice and I really like them opposed to not having them your thoughts?

Just talked to Two Toyota dealerships today and they indicated Toyota is discountinuing the SE Semi-Chrome Lower Moldings However some dealers may still have some on their shelves! I got my set ordered...wonder why this is happening? They told me only the bright chrome will be available odd I...

Too many potholes this winter have killed my 2008 XLE lower ball joints. I ordered a new pair from www.toyotapartsales.com in TX for $42 each. They look fairly easy to R&R but I need torque specs for the 3 nuts that hold it to the lower control arm and the nut on the ball stud. Hopefully one...

I have Toyota sienna 2004 LE with 86000 KMs (we take care of this car very well, It is only used for picking up kids from bus stop, grocery. Most time we drive our second car Honda Accord). When it is routinely serviced, dealer recommend to replace both front lower control arm bushings since...

The horizontal pipe that comes out of the engine broke off when replacing the lower hose. There is no way to attach the hose now. It is plastic, not cast iron like the upper hose connection to the engine. I cannot see the back of this plastic pipe as it goes to the back of the engine. There is 1...

I'm trying to remove the left hand lower dash panel (under the steering wheel). I've been searching online for a "how-to", but no luck .. Does anyone have some tips? Thanks