Toyota Sienna Forum - banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 18 Results
  1. Mods and Projects (Gen 1)
    I have a 1998 Sienna lowered 2 3/4 inch on 20" wheels. I found some Previa springs and made my own lowering kit out of it. I was wondering if anyone knows besides bags what other option I have to lower it a bit more, maybe the other 1/4 inch so it would sit on the wheel. Help!! I'm interested to...
  2. Mods and Projects (Gen 3)
    i was inquiring about buying these and redline360 rep advised that they're not being sold right now due to a defect...anyone who's bought might wanna verify if there any recalls... family safety is paramount
  3. Mods and Projects (Gen 3)
    hey guys I was wondering if anybody has the setup or had it and can let me know if it rubs it all I have 20 millimeter and 25 millimeter spacers H&R and I just ordered my megan lowering springs today does anybody know if it'll rub Megan said it's about an inch and a half drop which puts me close...
  4. Mods and Projects (Gen 3)
    Anybody have used/tried "Megan Lowering Springs" ?
  5. Mods and Projects (Gen 3)
    Just bought a 2013 and IIRC the specs show 5.6" ground clearance. Are y'all mounting oversize tires/wheels and bringing the van back down or just going for a lower ground clearance?
  6. Buy Sell Trade & Group Buys
    SOLD!!! RSR Ti 2000 lowering Springs for FWD 2010+ SOLD!! please close thread
  7. General Discussion (Gen 1)
    Hi all, I'm in the Vancouver, BC, Canada region and am pretty lucky to have local suspension manufacturer Canuck Motorsports around. I know a number of local Mazda 3 owners who are satisfied with these springs, and they are also known for building custom springs as one Mazda 5 owner I know has...
  8. Mods and Projects (Gen 3)
    Hey everyone, just wanted to let you guys know that we have 2 AWD springs that are in stock RIGHT NOW. we can ship from Los Angeles any time and the link to the item is:!product/prd1/1073388491/rsr-ti2000-titanium-lowering-springs specs: Ti 2000 Down Sus for the...
  9. General Discussion (Gen 2)
    OK GUYS! ATTENTION: 2ND GEN SIENNA OWNERS (2004-2010) RSR has finally come up with lowering springs for your van. They have confirmed that although there are slight differences with the Alphard chassis to the Sienna's, their suspension is basically the same. There are 2 options:... 1- 1" drop...
  10. Mods and Projects (Gen 3)
    Hey guys, So I am finally starting this GB in conjunction with RSR. SPECS: F: 1.8 inch drop R: 1.6 inch Drop The Ti2000 down springs are made of titanium material for durability, lightweight and also performance. here are pics of Toby's springs: Toby is extremely happy with the...
  11. Mods and Projects (Gen 3)
    Hey guys, I'm very excited to tell you guys that I have been talking to RS-R suspensions, a company based in Japan, that they have finally come out with their Sienna Lowering springs here in US. There are 2 options as of now that you guys can opt for. 1. ti2000 titanium down spring SPECS...
  12. General Discussion (Gen 3)
    We have a FWD 2011 XLE with a flat tire, fortunately at home. I've found the spare tire under the middle row, passenger side. The manual says to lower the tire via a bolt on the floor of the vehicle between the 1st and 2nd rows, on the right hand side. I've found a flap but there's just a bolt...
  13. General Discussion (Gen 3)
    Hey guys! Just spoke to James and I was wondering if anyone would be willing to be a guinea pig for the lowering springs... I believe the springs and install will be FREE!!! SOCAL people only please!! PM me if interested!!
  14. General Discussion (Gen 1)
    Are there any lowering spring for a 98-03 Toyota sienna,, I been searching online..& only seem to find air suspension... Thanks
  15. Mods and Projects (Gen 3)
    Hey guys, just spoke to James from Megan Racing a few hours ago and just wanted to let you guys know that finally a set of lowering springs are already in final test phase and should be on sale in the next month or two!!! Specs are not given to me yet BUT I'm pretty sure it's going to be lower...
  16. General Discussion (Gen 3)
    I just got off the phone with H&R Springs, i was talking to a guy named Ryan. I asked him if they were considering a spring for 2011 Sienna. Unfortuantely, right now he hasn't seen any much of a demand but the good thing is, he didn't say no! I also asked him, what can we do to put this in...
  17. General Discussion (Gen 3)
    Any update for the Eibach lowering for Sienna 2011 Base trim ???
  18. OEM & aftermarket products, mods & accessories
    Just curious what the options are, other than a custom setup, to get this thing a little bit lower to the ground. I don't like the idea of trying to use a lower rate spring from a Camry, since that will defeat some of the handling benefits of lowering (since I'm sure big sway bars don't exist...
1-18 of 18 Results