Toyota Sienna Forum - banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 20 Results
  1. Mods and Projects (Gen 3)
    I have a set of wheels that I need to use spacers to optimize fitment. I'd like to be as non-intrusive as possible to the stock hardware and this poses a problem as I would probably have to cut some length off the lugs for the wheel to seat correctly on the spacer. My wheels have a dual bolt...
  2. Buy Sell Trade & Group Buys
    Selling a pair of rear lift spacers for the gen2 Sienna (also fit some Highlanders and Camrys) for $40. Items cost $77 plus shipping from Russia. Items are new and unused and received from the Russian seller tema4x4 on ebay. I went a different route and never used. These fit right in the top of...
  3. Buy Sell Trade & Group Buys
    Bought these spacers to hold me over until I did wheels, well I jumped the gun and bought wheels on a black friday special so these are ready to be sold. H&R Hub Centric DRM spacers, 20mm front and 25mm rear, $206 shipped Email/paypal addy: [email protected]
  4. Mods and Projects (Gen 3)
    Brand New never installed Adaptec 20mm and 25mm spacers. These are the adapter style that have the studs built in to the spacers. Was going to install on my SE but decided to go aftermarket wheels instead. Looking to get what i paid for them 285 shipped.
  5. Mods and Projects (Gen 3)
    Hello everyone. After reading and looking all of your posts, got tired of the "sunked in" look and ordered H&R spacers (20mm for the front and 25mm for the rear). I have a 2015 Sienna Limited with 18 in. wheels. I plan to use stock springs and wheels. Anyone knows if it will rub with 5-6...
  6. Mods and Projects (Gen 3)
    please delete
  7. Mods and Projects (Gen 3)
    Anyone try 30mm spacers on the rear yet I have 25 now and would like it more flush wondering if it rubs
  8. Mods and Projects (Gen 3)
    hey guys I was wondering if anybody has the setup or had it and can let me know if it rubs it all I have 20 millimeter and 25 millimeter spacers H&R and I just ordered my megan lowering springs today does anybody know if it'll rub Megan said it's about an inch and a half drop which puts me close...
  9. Mods and Projects (Gen 3)
    Had to put on this evening. Was going to wait until my springs got here but couldn't wait. Here's some before and after pics. 25mm rear 20mm front
  10. Mods and Projects (Gen 3)
    I have a set for sale here:
  11. General Discussion (Gen 3)
    everything sold thank you.
  12. General Discussion (Gen 3)
    Just wondering if you can use bolt-on wheel spacers with the aluminum oem wheels on a 2011 LE? I plasti dipped them Gloss black and they look pretty good. It's my wife's Van but I want to give it a mod/aggressive stance look without buying aftermarket wheels. Was thinking 20mm rear 15mm front. I...
  13. Mods and Projects (Gen 3)
    Brand new, never opened, sealed 20mm H&R Trak DRS spacers(part#40656014), bought from . These fit our 2011-2014 sienna. I bought these over a month ago, but I decided to go another I don't need them anymore. I'm past the 30 day return policy so I can't get a...
  14. Mods and Projects (Gen 3)
    Can anyone elaborate on how to replace the wheel studs on 2011 and up Sienna? Any information is appreciated.
  15. General Discussion (Gen 3)
    Hello all need advice using a spacer on my 2013 sienna. I was thinking to put a spacer on my oem alloy wheels but not to sure what is my bolt pattern. Also if i use a 1inch spacer do i need to change the studs because it might be long and hit the wheels when i mount them or if I just use a 1/2...
  16. Buy Sell Trade & Group Buys
    Hi all, i'm selling 2 sets of HR SPACERS. They're 20/25mm and only used a week. reason why to sell coz i decided to go with other wheel setup, so i've no use with these. Plz PM me if there's any question. thx for looking
  17. General Discussion (Gen 3)
    I ended up changing my spacers to H&R's after bkwon's post. Though I felt nothing was wrong with them, I started to question them myself as did everyone who read that post, and decided on a full removal of them and inspection---and since most of the labor was going to be already paid, I went...
  18. Mods and Projects (Gen 3)
    stopped by friends auto shop today and installed my H&R spacers. My mechanic friend showed me what to remove on the first wheel and rest I did myself. You can do this yourself as long you have a impact wrench. About 1 hour from start to finish. Finally the sienna doesn't have that tucked in look...
  19. General Discussion (Gen 3)
    So I was very excited that my ichiba v2 spacers I ordered was being delivered this weekend. This morning I get all my tools ready to install the spacers and was excited to drive it with the spacers on. Well I torque the lugs to spec (80 lbs) according to the paper in the box and complete the...
  20. General Discussion (Gen 3)
    Here are some pics of the spacers installed on my Sienna SE. I think they came out great. 15mm on the front, 20mm on the rear. Mechanic installed them (simple bolt on). Drives well, and car looks "wider", $300 well spent.
1-20 of 20 Results