Search Results for ‘springs’

Brand new to this forum and doing some research before I buy a 3rd gen. I am the current owner of a beater 2nd gen - basically a backup car - and a one time owner of a manual transmission Previa! I'm looking to buy an AWD, maybe 2014-2016, and I'd like to have it set up for trips to the snowy...

Selling a pair of rear lift spacers for the gen2 Sienna (also fit some Highlanders and Camrys) for $40. Items cost $77 plus shipping from Russia. Items are new and unused and received from the Russian seller tema4x4 on ebay. I went a different route and never used. These fit right in the top of...

Hi Guys, I want to put some Ti2000 springs on my 2012 LE and I also want more support in the rear so I want install an air lift kit as well. I tried searching for similar questions but don't have any luck. I wanted to see if anyone has done this already or if you think it's possible. Thanks!

Hi. For sale a brand new set of OEM Gen3 2011~2015 XLE springs-2 front & 2 rear for $450 CAD. I bought them for my 2" lift project and never install them. Those springs were made in the USA with Toyota tags on them. Thank you,

I couldn't find any definitive info on this site about FWD vs AWD rear springs, so I did some digging on Moogs website. Attached are the specs for the 2 springs: 81409(AWD) and 81411(FWD). The spring rates are exactly the same, 350 lbs/in. The AWD is about 3/4" longer. Everything else is the...

My LE has always felt mushy to me and I would love some more steering control (less "floaty"). I have read the various postings about replacing springs and using the stiffer SE springs. Since I am planning to do front struts myself in a few weeks, it wouldn't be a big effort to swap in the SE...

For those of you who have this setup, any issues with alignment ?

Hi Everyone! Just got some STR 607s 20X10.5 +20 offset installed (all 4 corners). The +20 offset is pretty aggressive and both front and rear stick out just a little. I can't imagine using any wider tire than 245/45/20 with this setup. I would really like to lower the van but am concerned...

Ive been looking for pics of an 2011+ Sienna "SE" with RSR ti2000 springs, and I cant seem to find any.. Can someone please share?? :confused:

Planning to do a more comprehensive review and tips later, but first impression these are LOW!!! After waiting weeks for others to chime in on height drop and camber specs and no one responding, I bit the bullet and installed my set yesterday. Here's the 411. Had confirmed with Megan Racing...

I lost a chunk of my right rear coil spring. I know that I have to unbolt the rear shock and then lift up rear then the spring should come out. I'm wondering how high do I have to lift it up for it to come out with a 3 ton jack. Or if it's even doable in my driveway. I don't know how I lost a...

hey guys I was wondering if anybody has the setup or had it and can let me know if it rubs it all I have 20 millimeter and 25 millimeter spacers H&R and I just ordered my megan lowering springs today does anybody know if it'll rub Megan said it's about an inch and a half drop which puts me close...

Anybody have used/tried "Megan Lowering Springs" ? http://www.redline360.com/megan-racing-lowering-springs-toyota-sienna-MR-LS-TSE11FW?gclid=CM_SiLa4gMMCFQeMaQodLoUAvQ

As I've promised Paul at Vankulture.com when he provided me the prototype RSR springs shipped from Japan that was originally made for the early 2000s Toyota Alphard, the attached are some pictures I have of the RSR springs paired to KYB struts/shocks installed on my 2004 - 2010 Toyota Sienna...

SOLD!!! RSR Ti 2000 lowering Springs for FWD 2010+ SOLD!! please close thread

Our 2004 LE sags when loaded (well within limits). With a hitch mounted bike rack it's even worse. We've a tow hitch which scrapes on curbs, speed bumps, etc. Our mechanic says the springs look okay but could be replaced. Considering replacing springs vs. Air shocks vs. Sumosprings vs. ??? How...

Wheels: MRR GF6 20x10.5 +25 Tire Size: 245/45/20 Suspension: Megan Racing prototype https://www.dropbox.com/sc/tnbtal2eoan5go0/AABAUgmv-cyozEDmOxV3xmtfa

Has anyone else jacked the rear tires up by putting the jack under the rear springs? The 2003 Owners Manual shows that as the proper location (page 291 at this link: http://www.toyota.com/t3Portal/document/om/OM45410U/pdf/7-1.pdf) I did this when I rotated my tires this weekend. It went fine...

can i keep stock suspension and just change the LE springs to SE springs. Wanting to get a 1/2 in. drop at most. would 245/45/20 tires still work with this setup?

Hi all, I'm in the Vancouver, BC, Canada region and am pretty lucky to have local suspension manufacturer Canuck Motorsports around. I know a number of local Mazda 3 owners who are satisfied with these springs, and they are also known for building custom springs as one Mazda 5 owner I know has...