Toyota Sienna Forum - siennachat.com banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 9 Results
  1. Problems, Maintenance, and Repair (Gen 1)
    Hello all! I hope everything is well. I currently own 2 Siennas (01 XLE 130k miles, 02 XLE 202k miles) The issue that I am having with my 01 Sienna is that about 2 months ago it started misfiring, I replaced all the spark plugs (bosch double iridium), and coils (OEM Toyota/Denso coils) I...
  2. Problems, Maintenance, and Repair (Gen 2)
    I've a 2008 Toyota sienna and I'm trying to see if I can start address my engine rattling noise, which I've learnt is coming from vvt issues. On Learning that a part of the problem might be a vvt solenoid, I went ahead and bought two from Rock auto, Beck/arnley brand to be exact. My issue is...
    vvt
  3. Problems, Maintenance, and Repair (Gen 1)
    2001 Sienna, 140k miles is setting code P1349 (as well as misfire codes). I've taken out the solenoids and verified they activate on 12VDC. Next step seems to be to find and clean the oil screen. Anyone know where I can find it? I can't seem to locate it or a good diagram of its location. Thanks!
  4. Problems, Maintenance, and Repair (Gen 2)
    Just finished replacing head gaskets on 2004 LE. I was not thinking and thought the VVT sensor was the cam position sensor. Tested VVT sensor and it was not in spec for the cps I thought I was testing. Pulled it. Got new cps and found out what I did pull was the vvt sensor. So my question can...
  5. Problems, Maintenance, and Repair (Gen 2)
    Wondering if anyone has experienced this, and the approximate repair cost. I have a 2008 Sienna LE AWD and I recently experienced an oil line failure to the VTT-i cam gear. Apparently this was a known problem, but unfortunately it wasn't known to me. I had the oil line repaired by my general...
  6. General Discussion (Gen 2)
    Any development on this issues ? Should I be concerned with my CE 2009 ( canadian model ) Thanks guys
  7. Problems & Issues
    The only drawing I have isn't very clear on the locations of these. I am having multiple random misfires on 2,4,6 cylinders which is causing it to throw other codes related to bank 2. I cleaned the maf sensor as well as the camshaft position sensor. The camshaft sensor did have some metal...
  8. How To Guides / Do It Yourself Instructions
    The only drawing I have isn't very clear on the locations of these. I am having multiple random misfires on 2,4,6 cylinders which is causing it to throw other codes related to bank 2. I cleaned the maf sensor as well as the camshaft position sensor. The camshaft sensor did have some metal...
1-8 of 9 Results
Top