Rays Versus VV52S powder coated lollipop red 20x8.5 +28 Continental ExtremeContact DWS06 Plus 255/45R20

 

Very unique, I like it. Do you see any issues with going 22” with that same offset or possibly any additional room, possibly another 1” inside for say a 10.5” wheel?

 

View attachment 51840 View attachment 51840 View attachment 51841

Very unique, I like it. Do you see any issues with going 22” with that same offset or possibly any additional room, possibly another 1” inside for say a 10.5” wheel?

Depends on what tires you are planning to put on the wheels. 265s would be the most I would go with. Anything wider is overkill. You don’t want to stretch the sidewalls. Suspension on these are quite soft. I wouldn’t recommend going to wide on wheels or tires. 9.5-10” is about the limit. There is a guy on air doing 22” right now. Some guy from LV named Mike on VanKulture.

 

I'e got a set of 20" rims sitting in my living room. Just waiting for the van now. lol.

what are the pros/cons to going with the following tire sizes...
245/50/20 +1.7%
255/45/20 -0.3%

 

Not much of a difference really. Speedo will be faster or slower but not by much. I picked 255/45R20 because of availability and price. There are more tire choices and pricing a slightly cheaper.

 

Bumping this thread. I’m still waiting to take delivery of my 4th gen, but looking for some build inspiration lol.

 

Fifteen 52 Metrix MX 17x8 38 offset
245/65-17 Falkin Wildpeaks A/T Trails

Kinda of a cool side by side with stock

 

Some pics of my custom BC Forged 20" wheels wrapped in OEM 20" Michelins, in Royal Gold tint.

 

Does anyone know the center hub size of the 4th gen ? Is it 60.1 mm or 73.1 as other sites suggest ? I know its 5 x 114.3. Also, what other Toyota SUVs/vans share this same PCD/hub size and offset ?

 

Toyota Sienna 2021 - Wheel & Tire Sizes, PCD, Offset and Rims specs

Toyota Sienna 2021 - Find out the correct alloy wheel fitment, PCD, offset and such specs as bolt pattern, thread size(THD), center bore(CB) for Toyota Sienna 2021

www.wheel-size.com

 

Lexus RX 350 wheels
20x8
30 mm offset

 

Lexus RX 350 wheels
20x8
30 mm offset

Zaraspook - do you mind sending a side profile picture of your van/wheels. I want to see how far out does the 30 offset make the wheels stick out of the fenders.

 

Nice I was curious on how those would look.

 

Anyone using runflats?

 

Got these from a 21 venza. Look a lot better then the basic le/xle 17” rims. Just ordered some cross climates to throw on too.

 

What tire sensors did you used, OEM or aftermarket? Also, what tire size you have?Thanks

 

I think the extra offset gives it a sporty look.

 

I think the extra offset gives it a sporty look.

Agreed - I think they look great.

 

I kept the tires that came on it. 235/50/20. If I had already gotten a lift I might have considered going slightly larger.

 

Any body tempted to try something like BBS LMs? They need a spacer/adapter to convert the bolt patter

 

My rule of thumb is to always stay away from spacers or adapters. It just adds one more component that can fail. I know plenty of people have success when installed properly, but you are still adding another failure point regardless

 

Can anyone share if their set up effected the MPGs any?

 

Hey guys, looking for the following 20" replica wheels or something very similar. I am not seeing these in stock anywhere:

FR 79 Lexus RX
or
Art Replica 206

In gloss or satin black. Anybody know where I can find them in stock?

 

Mines aren’t replica but I got them off eBay.

 

235/60/18 - rim weighs 28 lbs. tire weighs 26 lbs

 

Officially testing these wheels from my other car…so far so good. No rubbing or anything. These are an aggressive fitment. 18.9.5

 

Might rub a little more with a tire mounted on them

 

We’ll find out soon lol

 

For you guys that prefers the meaty look while using the stock tires …did the measurements for you already in terms of fitment. No rub a dub dub…hope this helps with wheel and tire fitment with our cars.

 

What size wheel and offset? What size tires?

 

I found some 19x8 Enkei Raijins and Continental Cross Contact LX Sport 235/55 off of marketplace. Tire Installer had to add a ring to match the centre cap bore. I bought new TPMS sensors as I mounted winter tires on the stock 17" rims.

 

what's the offset of the wheels?

 

.

 

I have the 2021 XSE AWD and also a Model 3 Tesla, wondering if anyone has looked in to installing the model 3 stock aero wheels on Sienna? I have seen on Honda Civic forums where they have done so and since Sienna has the same Bolt pattern they should fit. I have Touren TR78 18inch on stock tires on my Sienna currently and those are also also compatible with Model 3. I really want to swap them so that I don't have store /sell Model Aero wheels.

 

I saw someone on the 4th Gen FB group did these

 

Finally got around to putting the TRD Camry wheels on with Wildpeak AT Trails on my XSE AWD. Pulled off our Rav4 Prime. There was a photoshop I did a year ago or more before I even had the van floating around on the forum.

notes:
There is a smooth side and aggressive sidewall side to these tires. This is the more aggressive sidewall side.
I lost 0.5-1 mpg from oem AWD XSE setup

Next step is trim chrome delete then I’m done!

 

Finally got around to putting the TRD Camry wheels on with Wildpeak AT Trails on my XSE AWD. Pulled off our Rav4 Prime. There was a photoshop I did a year ago or more before I even had the van floating around on the forum.

notes:
There is a smooth side and aggressive sidewall side to these tires. This is the more aggressive sidewall side.
I lost 0.5-1 mpg from oem AWD XSE setup

Next step is trim chrome delete then I’m done!

View attachment 56107

what size tires did you used ? Any spacers needed or it was a direct fit without modifying