So I did it over the weekend.
Materials that I used were:
1. Mini ratchet
2. Standard size screw driver
3. Flat head screw driver (to remove the clips)
4. Trim remover (optional)
5. Flashlight
6. Dremel Tool
As shown in the photo, I made the cut part lower compared to Velox. Took me 3 hours total to do it.
Thank you so much @Velox003
Materials that I used were:
1. Mini ratchet
2. Standard size screw driver
3. Flat head screw driver (to remove the clips)
4. Trim remover (optional)
5. Flashlight
6. Dremel Tool
As shown in the photo, I made the cut part lower compared to Velox. Took me 3 hours total to do it.
Thank you so much @Velox003