Toyota Sienna Forum - siennachat.com banner
1 - 4 of 4 Posts

· Registered
Joined
·
29 Posts
Discussion Starter · #5 ·
thank you for the info. I will disable it if causes future problems.


You can disable the DRLs if you want.

Going off (possibly faulty) memory here, so check carefully before you do it.

Locate the fuse box under the hood, open it. In the corner that is closest to you and the center of the vehicle (lower-left, if you will), there is a jumper. It looks a lot like a fuse, but it's a different color. There are a few other fuses along the front edge, and a few relays in the rest of that location. The one you are looking for should be labeled "SHORT PIN". Pull it, you will no longer have DRLs.

My '05 did not come to me with DRLs enabled. By searching this forum many years ago, I found that adding DRLs was as simple as adding that short pin. You can also use any normal fuse, as it only completes a ground path for a relay.

.
 

· Registered
Joined
·
29 Posts
Discussion Starter · #7 ·
When I flash hi beams, Both hi and low beams flashes. I hope that’s how it was designed to work. On Hondas/acuras only hi beam flashes.


Thanks. I meant does flashing the brights quickly work as expected or does it take more than a second for the brights to illuminate at full intensity? I had cheap H4 style LEDs years ago a quick tug on the stalk wasn’t enough for a meaningful flash of the brights. High beams worked otherwise.

Sixto
‘04 LE FWD 195K miles
 
1 - 4 of 4 Posts
Top