[OnTheRoadAgain]

I would caution you to take the few minutes and remove your door panel and see what wires are populated on the ECU to door connector.
I bought the OEM power folding mirror units based on feedback on here that it would be PnP. It is not. My ECU to door connector only has the 5 pins.
So if you get this option from ali express, you will either need to liven the wires yourself and populate your connector, use the aliexpress harness and power folding button for the aliexpress power folding motor units, or you already have the wires populated (I have a 2021 XSE but maybe the 2024 does) already and it will be PnP.

Interesting. The specs says for 5 pin. Or am I wrong? Maybe just ask the seller.

Like all AliExpress stuff, you can pick from 5,9,11.

 

[OnTheRoadAgain]

I'll do it one day. I'm also trying to put some 6x9s I have laying around and some sound deadening material in the doors too. Will report back when i get this stuff done.

Seems to be more work than swapping taillamps (XLE -> XSE) for sure. That requires a custom harness as well, at least I made one.

Tag been when you figure it out, I might be interested.

 

[OnTheRoadAgain]

the wiring, do I order the aliexpress how many pins ?

I think he's trying to say you will need to find your own power source and trigger wires for your turn signals to make it work.

This was similar on the 3rd Gen as well. The cables were found by the sill in the 3rd Gen of I recall correctly.

Someone needs to do the same on the 4th Gen for this to work as well.