Toyota Sienna Forum - siennachat.com banner

Torklift Ecohitch finished product

99K views 211 replies 87 participants last post by  MasterAviator 
Finally installed mine today. Took about 4 hours but that was me taking things off and putting them back on. A few notes for anyone else (this was on an LE):
  • Make sure you run the wire to the rear sensor box and your trailer wiring through the small gap on the left side of the hitch between it and the car. Run these when the hitch is still loose.
  • When putting on the hitch, insert the screw and washer into the hole closest to the car on both sides. You won’t be able to insert it after it is installed without taking it off again.
  • I lightly tightened everything then went around and torqued. I had no issues with fit.
  • As someone else stated, the depth of my cut on the bumper cover was only 3 3/8, an inch shorter than directions.
  • PS those clips on the bottom of the bumper cover are dumb. They don’t slide easy at all.
 
Top